How-To: Custom Turbo Control Solenoid Rack
Well I've just finished my install of the turbo control solenoid upgrade. Pulled a lot of information from different threads here and there. Figured I would share my write up in case it is useful to anyone.
I had to upload it to Google drive since it was too large to attach here. https://drive.google.com/file/d/1Hwe...ew?usp=sharing Hopefully this works. |
Good write up. How are your results?
|
My car still has some sort of issue and isn’t running correctly. But I am pretty confident in the solenoid rack that if the ECU is telling the solenoids what to do that they would work perfectly fine. Whatever my issue is currently happened before I installed this. With no change. So I am getting more skeptical of either the harness or ECU. Though the problem doesn’t change with a Power FC so who knows. I’ll figure it out sooner or later! |
Whats different than this AzEknights solenoid kit ?
|
Originally Posted by seven1997
(Post 12259595)
Whats different than this AzEknights solenoid kit ?
|
|
After scrolling for 200 posts I still don’t see any installation guide except for people who bought it, looks like they were sent installation instructions. |
does anyone have just one of those solenoids on hand that I could buy from them by chance?
thanks, Ben |
They are off the shelf. In the writeup it says they are Fabco-Air 103SMG-2-M-V-12VDC .
|
Originally Posted by arghx
(Post 12283899)
They are off the shelf. In the writeup it says they are Fabco-Air 103SMG-2-M-V-12VDC .
Ben |
All times are GMT -5. The time now is 12:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands