What size of an Front mount intercooler can i get into my 92 FD?

What size do you got and how much power do you take out of your engine?

Or does a OEM fitted ones work just as good?

 

 

You do know they had 91 and 92 FD's dont you? He's not from the US, they have those over there.

 

Yepp my FD is 92.... probobly much the same as an 93 over there.

Anyone willing to answer my question? It doesnt have to be a 92 that you got.

Or does everyone of you still got the crappy OEM IC???

 

Mine is a 92 also. Its called a 93, but it was made in July 92.

Anyway, just check the RX-7 store, the link is above. Any of those ICs will work fine.

Some people use stock mount and some use front mount.

It really doesn't matter that much, because the ICs are 100 times better then stock, so just as long as you upgrade, your fine.

 

Sorry about that...

 

Martin - the closest place to you, That I know of is: www.k-power.dk
They have front mounted HKS intercoolers. PM me, I know someone who is uses this unit in Denmark. If, your not interested in HKS. I will try to help you out.

 

I was thinking maybe get a local make an IC for me. 100$ for the job plus core.
Ive found a core thats 690*240*110 millimeters.
Will i get that into my front?

 

Sounds like it should work...I had to do the conversion because of the whole American measurements thing.

 

In your sizes it should be 27.17 * 9.5 * 4.3 Inch

How about the depth? Can I lift the Water and AC coolers to get more space?

 

Damn thats big!!! Where can I get one? I think that is a little thick, anything over 3.5" is kind of a waste. You may have some major fitment issues, not to mention if you didn't you may have to trim a lot of the inside of your bumber, good luck!

 

No I dont want to cut my bumper. But If I could get the other coolers a little back it may work.....

Thats the "small" one I´ve found. It would cost 300$ for the core plus 100$ for the "sides". so its pretty cheap.

 

Is this big enough... its the Greddy IC.

 

How big is it?

Ive seen some cars that I think have got their other coolers a little bit back. Anyone done that here?

 

I made this one when I had a single turbo rotary engine in there. It was a horizontal mount, and the core was 4 1/2 in. thick. The volume of the core was 780 cu in.

 

odd placement. Did you got vents in the hood?

 

And what's with the position of the air filter above the passenger headlight? Doesn't even look like you could use the lights! Maybe he just doesn't have a hood.
~Tom

 

yah ive seen that type of placment a few times...
i think thats the front mount radiator setup for racing apps.

front mount FC is more for darg i think...


or is it visa versa, correct me if im wrong!