Hood Dampers sticking
#1
thats not paint....
Thread Starter
Hood Dampers sticking
Anyone experience this? I installed a set of Tein hood dampers a few years back. It seems they have lost their rebound & I have to push the hood all the way up.
Similar to my hatch on my 215k mile beater... but not something I'd expect from an aftermarket performance product
Similar to my hatch on my 215k mile beater... but not something I'd expect from an aftermarket performance product
#5
thats not paint....
Thread Starter
Response directly from Tein:
Tried some silicone spray but no go, maybe something a little thicker in constancy next. Damn the RE ones coming out after I had these purchased!
Thank you for your inquiry. Please take note that our Hood Dampers are
designed to open the hood half way. You would need to lift the hood to
completely open the hood.
Should you have any further questions, please feel free to contact us.
TEIN USA INC
designed to open the hood half way. You would need to lift the hood to
completely open the hood.
Should you have any further questions, please feel free to contact us.
TEIN USA INC
#6
Beyond
iTrader: (36)
I installed a used TEIN hood damper last year, and I lubricate it, still only open half way on my stock hood.
I am going aftermarket FRP vented hood soon, will the TEIN hood damper still work? But I remember these TEIN hood damper is only for stock hood weight. What hood damper should FRP or CF hood uses?
I am going aftermarket FRP vented hood soon, will the TEIN hood damper still work? But I remember these TEIN hood damper is only for stock hood weight. What hood damper should FRP or CF hood uses?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM