I've looked up the Twin Power PNP harness and mine somehow looks like it has more connectors than the pics I see of the PNP harness. Usually the pics of the PNP harness have one big connector, a smaller one, and a ground. Mine appears to have one 4 prong and 3 two prong connectors and a ground. Can someone help me out and tell me what I do with all these connectors, mainly the small two prongers?

 

https://www.atkinsrotary.com/store/i...-05ZDetail.jpg

The 2-prong plug into the stock coils.

I attached a link of how the stock coil harness looks like, yours looks kind of like the stock one (older versions has the ground)

 

Thanks for the help. I was trying to install it without taking off the throttle body like some of the guides directed but really it's hard to see the coils at all without removing it. Once I saw the coils, it was very direct.

 

White connector goes to T1 coil, Black goes to L1/L2 coil and Blue goes to T2 coil.

 

The yellow connector on the twinpower harness plugs into the other end of the coil harness you have pictured. It acts as a bridge between the coils and twinpower.