3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HKS Boost controller

Thread Tools
 
Search this Thread
 
Old Mar 6, 2006 | 11:15 PM
  #1  
JDawG707's Avatar
Thread Starter
xx-Team-xx
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 769
Likes: 0
From: Fairfield, CA
HKS Boost controller

I have a HKS boost contrller and it didnt come with a manuel, can someone plz forward me to another thread cause ive searched for like 1hour now and no specfic instructions....




those are the pics and may i have detailed instructions TY members ^^

PS: car all stock exept Intake, and DP soon
Jackie
Reply
Old Mar 6, 2006 | 11:22 PM
  #2  
Turbo II FC's Avatar
Total Balance is Key
Tenured Member: 20 Years
iTrader: (14)
 
Joined: Jul 2002
Posts: 1,196
Likes: 6
From: Texas
Try HKS USA's website. I had that same boost controller on my FC. I know for a fact the instruction manual is on there.
Reply
Old Mar 6, 2006 | 11:25 PM
  #3  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
http://www.hksusa.com/faq/?ID=1647


You searched for an hour without checking HKS's website?
Reply
Old Mar 6, 2006 | 11:38 PM
  #4  
JDawG707's Avatar
Thread Starter
xx-Team-xx
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 769
Likes: 0
From: Fairfield, CA
LOL sry i dont ever use HKS, i jsut got this one from my brother so it was on a honda, now a its ogin on a 7 =D
Reply
Old Mar 10, 2006 | 12:13 AM
  #5  
JDawG707's Avatar
Thread Starter
xx-Team-xx
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 769
Likes: 0
From: Fairfield, CA
Okay i just installed the BC and im not sure if its correct...is there a manuel just for the Rx7's specifically? its a EVC III HKS....i taped into a Vacume hose b4 the intercool, T'd off the Primary actuator and also taped into the UIM boost gauge nipple....if anyone has steps and pictures specifically i would like to have them or a forward into a site EXEPT the HKSusa.com website, ive printed out the hole BC manuel but its not spefiic to the 7.

Jackie
Reply
Old Mar 10, 2006 | 01:45 AM
  #6  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
There are tons of write ups on installing boost controllers, they're all about the same...

Take some pictures because it sounds like you have things wrong....you shouldn't be "T-ing" into anything!
Reply
Old Mar 10, 2006 | 08:32 AM
  #7  
JDawG707's Avatar
Thread Starter
xx-Team-xx
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 769
Likes: 0
From: Fairfield, CA
Originally Posted by rynberg
There are tons of write ups on installing boost controllers, they're all about the same...

Take some pictures because it sounds like you have things wrong....you shouldn't be "T-ing" into anything!
o okay, ill take some pictures after school....it should b posted around 3:30 ish -8:00GMT
Reply
Old Mar 10, 2006 | 06:18 PM
  #8  
JDawG707's Avatar
Thread Starter
xx-Team-xx
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 769
Likes: 0
From: Fairfield, CA
Here are some pictures of the hoses and everything i wired up, can someone tell me what im did wrong and am i suppose to pop out the pills?also i only T'd the bottom actuator...
Attached Thumbnails HKS Boost controller-bc1.jpg   HKS Boost controller-bc2.jpg   HKS Boost controller-bc-mani.jpg   HKS Boost controller-bc-.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
stickmantijuana
MoTeC
5
Sep 10, 2015 07:58 PM




All times are GMT -5. The time now is 09:17 AM.