RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   HKS Boost controller (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/hks-boost-controller-516369/)

JDawG707 03-06-06 11:15 PM

HKS Boost controller
 
I have a HKS boost contrller and it didnt come with a manuel, can someone plz forward me to another thread cause ive searched for like 1hour now and no specfic instructions....
http://i31.photobucket.com/albums/c3...6/DSC01003.jpg
http://i31.photobucket.com/albums/c3...6/DSC01004.jpg
http://i31.photobucket.com/albums/c3...6/DSC01005.jpg
http://i31.photobucket.com/albums/c3...6/DSC01002.jpg
those are the pics and may i have detailed instructions TY members ^^

PS: car all stock exept Intake, and DP soon
Jackie

Turbo II FC 03-06-06 11:22 PM

Try HKS USA's website. I had that same boost controller on my FC. I know for a fact the instruction manual is on there.

rynberg 03-06-06 11:25 PM

http://www.hksusa.com/faq/?ID=1647


You searched for an hour without checking HKS's website? :scratch:

JDawG707 03-06-06 11:38 PM

LOL sry i dont ever use HKS, i jsut got this one from my brother so it was on a honda, now a its ogin on a 7 =D

JDawG707 03-10-06 12:13 AM

Okay i just installed the BC and im not sure if its correct...is there a manuel just for the Rx7's specifically? its a EVC III HKS....i taped into a Vacume hose b4 the intercool, T'd off the Primary actuator and also taped into the UIM boost gauge nipple....if anyone has steps and pictures specifically i would like to have them or a forward into a site EXEPT the HKSusa.com website, ive printed out the hole BC manuel but its not spefiic to the 7.

Jackie

rynberg 03-10-06 01:45 AM

There are tons of write ups on installing boost controllers, they're all about the same...

Take some pictures because it sounds like you have things wrong....you shouldn't be "T-ing" into anything!

JDawG707 03-10-06 08:32 AM


Originally Posted by rynberg
There are tons of write ups on installing boost controllers, they're all about the same...

Take some pictures because it sounds like you have things wrong....you shouldn't be "T-ing" into anything!

o okay, ill take some pictures after school....it should b posted around 3:30 ish -8:00GMT

JDawG707 03-10-06 06:18 PM

4 Attachment(s)
Here are some pictures of the hoses and everything i wired up, can someone tell me what im did wrong and am i suppose to pop out the pills?also i only T'd the bottom actuator...


All times are GMT -5. The time now is 09:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands