3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

hesitation issue please help

Thread Tools
 
Search this Thread
 
Old Sep 26, 2008 | 04:06 AM
  #1  
amunoz3's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jun 2008
Posts: 186
Likes: 0
From: phoenix, az
AZ hesitation issue please help

i recently had a brand new tranny (auto) installed 4 days ago and yesterday it started acting up really strange. in between 1-2 rpms it will hesitate it feels almost like fuel cut off. I replaced the plugs and wires and it seem to run okay for a small test drive then it started acting up again. but if i step on the gas it will go up the rpms just fine it seems to hate going a steady speed. please help.
Reply
Old Sep 26, 2008 | 04:36 AM
  #2  
Azcamel's Avatar
Put it in her butt
iTrader: (1)
 
Joined: May 2008
Posts: 848
Likes: 0
From: Tucson
what do you mean NEW? from the dealer new or new to you as in used that works. it might just be a crap trans, not enought fluid, wireing messed up, etc... call glen at azrotoryrockets.com and ask him to help out.
Reply
Old Sep 26, 2008 | 12:45 PM
  #3  
amunoz3's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jun 2008
Posts: 186
Likes: 0
From: phoenix, az
it is a brand new tranny from the dealer. i talked to az rotary rockets they said they have almost no experience working with the auto trannys and recommended i go to a dealer.
Reply
Old Sep 26, 2008 | 04:37 PM
  #4  
Azcamel's Avatar
Put it in her butt
iTrader: (1)
 
Joined: May 2008
Posts: 848
Likes: 0
From: Tucson
thats weird, did you call the dealer and tell them? who did the install?
Reply
Old Sep 27, 2008 | 07:10 PM
  #5  
amunoz3's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jun 2008
Posts: 186
Likes: 0
From: phoenix, az
the dealer replaced the tranny and i took it back there and they are saying it is a total new problem with possibly the ignition but they seem like they are not interested in checking it out its retarded.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
betes
1st Generation Specific (1979-1985)
8
Sep 27, 2015 08:25 AM
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 10:51 AM.