3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help Wont Start

Thread Tools
 
Search this Thread
 
Old Apr 24, 2007 | 12:05 AM
  #1  
smitty95's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 13
Likes: 0
From: PHILLY
Help Wont Start

hello
95 rx7 silverstone 34,000 bought new in VA vin #313
just fixed a vacuum line and had to remove and reinstall alternater , i have done several times, forgot to disconnect battery and did get a spark from wrench near alternator "me bad" . Put all back together there is one blue eletrical connector not plugged in i cant remeber ever unplugging it is it supposed to be disconnected ?
Car will not start just cranks over, no dash lights. no radio, no horn, no dash readout at all ,headlights, work interior fan motor works?
Did i fry 18-811 main relay? or other relays or fuses ? Please help
many thanks
smitty
Reply
Old Apr 24, 2007 | 12:09 AM
  #2  
sevensix's Avatar
rotor rotor pow.
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2005
Posts: 3,170
Likes: 1
From: Southern CA
did you check to see if the battery is fully charged, or for the hell of it, get it charged. the blue plug is probably the one for california cars only(smog)
Reply
Old Apr 24, 2007 | 12:13 AM
  #3  
smitty95's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 13
Likes: 0
From: PHILLY
battery fully charged red optima, i keep it on a battery tender ? and thanks about the blue plug , i wont keep searching !
Reply
Old Apr 24, 2007 | 10:50 PM
  #4  
smitty95's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 13
Likes: 0
From: PHILLY
problem fixed wont start

first make sure battery is disconnected, this is what sent me on this problem!

found the problem, main fuse 120amp along side battery, you need to take a flashlight and magnifier and examine the fuse to see the break, i missed it the first time ! and there are nuts on each side of the terminal loosen or the fuse wont come out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 03:26 AM.