3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HELP. unknown tap

Thread Tools
 
Search this Thread
 
Old 12-15-08, 04:12 PM
  #1  
There goes a prius!

Thread Starter
iTrader: (51)
 
FD3S4Life's Avatar
 
Join Date: May 2007
Location: Gardena, CA.
Posts: 664
Likes: 0
Received 0 Likes on 0 Posts
Exclamation HELP. unknown tap

See pic below. This is located on the driver side center iron on the bottom. Is this tap for a sensor of some sort or oil line?

All help appreciated.
Attached Thumbnails HELP. unknown tap-unknown-tap.jpg  
Old 12-15-08, 04:20 PM
  #2  
backslash beanbagrace

iTrader: (1)
 
Stanello's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 2,141
Likes: 0
Received 2 Likes on 2 Posts
It's nothing. Its a leftover hole from casting.

Edit: also the small bolt on the left is the coolant drain plug.

Last edited by Stanello; 12-15-08 at 04:27 PM.
Old 12-15-08, 04:26 PM
  #3  
There goes a prius!

Thread Starter
iTrader: (51)
 
FD3S4Life's Avatar
 
Join Date: May 2007
Location: Gardena, CA.
Posts: 664
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Stanello
It's nothing. Its a leftover hole from casting.
Ok, so open or closed it wont make a difference correct?
Old 12-15-08, 04:28 PM
  #4  
backslash beanbagrace

iTrader: (1)
 
Stanello's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 2,141
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by FD3S4Life
Ok, so open or closed it wont make a difference correct?
Nope, doesn't matter.
Old 12-15-08, 05:01 PM
  #5  
apeiron

iTrader: (2)
 
Join Date: Oct 2002
Location: Boulder, CO
Posts: 1,773
Likes: 0
Received 0 Likes on 0 Posts
Typically, this is where you would connect a ground.... the specific ground I believe runs off the wires that run to the coil pack --- there is a small ground that connects directly to the coil pack but if you follow the main wire harness further you should be able to track down the one im speaking off
Old 12-15-08, 05:25 PM
  #6  
There goes a prius!

Thread Starter
iTrader: (51)
 
FD3S4Life's Avatar
 
Join Date: May 2007
Location: Gardena, CA.
Posts: 664
Likes: 0
Received 0 Likes on 0 Posts
ok thanks for all your help guys.
Old 12-15-08, 08:51 PM
  #7  
backslash beanbagrace

iTrader: (1)
 
Stanello's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 2,141
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by spoolage
Typically, this is where you would connect a ground.... the specific ground I believe runs off the wires that run to the coil pack --- there is a small ground that connects directly to the coil pack but if you follow the main wire harness further you should be able to track down the one im speaking off
That ground connects a to the block about halfway up the side of the iron, and bolts to the block with a 10mm bolt. Not that it really matters where you put it though...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
Smokeyfb33
Old School and Other Rotary
10
10-01-15 12:10 PM
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM



Quick Reply: HELP. unknown tap



All times are GMT -5. The time now is 06:01 PM.