3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

help with taillights

Thread Tools
 
Search this Thread
 
Old Jun 3, 2008 | 03:36 PM
  #1  
Im_DANomite's Avatar
Thread Starter
Newbie
 
Joined: May 2005
Posts: 3
Likes: 0
From: Severn, MD
help with taillights

i'm having issues with the taillights and gauge cluster not lighting up. brake lights work, turn signals work, and the head lights work. the switch is ok and the fuses are good as well. what else could be the problem? what exactly is this joint box in my wiring diagrams? anyone???
Reply
Old Jun 3, 2008 | 04:07 PM
  #2  
katit's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2006
Posts: 505
Likes: 2
From: St. Louis
Joint box is your fuse box under your left feet.
Reply
Old Jun 3, 2008 | 05:53 PM
  #3  
Azcamel's Avatar
Put it in her butt
iTrader: (1)
 
Joined: May 2008
Posts: 848
Likes: 0
From: Tucson
i had te same problem last night, it is the 15amp fuse in the driver side kick panel, if you put a new fuse it and it pops right away when you turn on the light then something is ground out. my problem was that a wire just rubbed against they body for a longtime and finally gound itself out and caught fire, i seperated it and waped electrical tape and wired loomed it, works now.
Good luck on yours, took me 8hrs to track down, i tore the whole center consol and dash to check all the wires, took out the tail lights to check that, and then fiinally the front end to see the melted wire.
Reply




All times are GMT -5. The time now is 12:33 AM.