HELP PLEASE! swap done. no spark.
#1
Full Member
Thread Starter
Join Date: May 2007
Location: saskatoon sk canada
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
HELP PLEASE! swap done. no spark.
i swapped a used engine into my fd a little while ago but it wont start. te engine cranks, all the right lights come on when i turn the ignition, its getting fuel, everything seems to be fine but im getting no spark.. relays and fuses are all fine. anybody have any ideas? thanks!
#3
Full Member
Thread Starter
Join Date: May 2007
Location: saskatoon sk canada
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
i doubt its coils. i think it might be a little deeper then that. i have a jdm vehicle and i bought a domestic engine for it. but i took the engine harness off this engine and i put a
JDM one on it so all the plugs around the ECU would fit.. but everything fit good on the engine.. so i dont know.. how can i check the coils?
JDM one on it so all the plugs around the ECU would fit.. but everything fit good on the engine.. so i dont know.. how can i check the coils?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM