Help! No ODO
10-31-04, 03:16 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2003
Location: Island of Hawaii
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help! No ODO
I'm blank. where did it go or where do I look for clues to why my odometer/ trip dosn't work. Ilumination works with lights but no numbers. Any suggestions?
10-31-04, 07:14 AM
#2
almost done
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
same thing happened to me but this was when i was switching gauge clusters back and forth , it was a harness plug check that none of the pins on the connectors are flat.
10-31-04, 09:40 AM
#3
Lives on the Forum
The odometer has it's own light bulb behind it. If this bulb burns out you'll think the odometer quit.
Shine a flashlight onto the odometer while the key is on. If you can barely make out the dimly lit numbers you have a blown bulb or a loose connection to the bulb. If you see absolutely nothing while the light shines on it then I would inspect the odometer itself.
Shine a flashlight onto the odometer while the key is on. If you can barely make out the dimly lit numbers you have a blown bulb or a loose connection to the bulb. If you see absolutely nothing while the light shines on it then I would inspect the odometer itself.
Thread
Thread Starter
Forum
Replies
Last Post
CrispyRX7
3rd Generation Specific (1993-2002)
7
11-18-02 12:17 PM