i bought a new FD with Volk GT-C wheels and the seller gave me the stock rims with the car. I took the volks off and put the stock wheels back on. the problem is, is that the wheels do not fit completly flush against the wheel hub. there is a about 2 mm gap around which is really annoying me. do i need spacers to fit the OEM wheels back on? i am pretty sure i dont. what do you think my problem is?

 

i would also like to add that the front right wheel/hub is fitting perfectly and i have tried switching wheels and they all fit fine. the font left and both rear wheels do not fit correctly

 

nevermind figured out the problem. after careful inspection there were wheels spacers on the hubs. i am in idiot.

 

Likely hub centric rings, that came off the Volks and were stuck on the hub.

 

that happened to me on my old civic...putting the stock wheels back on i got this crazy rattle...took it to a shop to complain and realized i had some spacers on...felt like an idiot...