HELP my Rotary Brothers/Sisters
#1
ninja
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Statesville/Greensboro, NC
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
HELP my Rotary Brothers/Sisters
ok here is the problem: If I gun the car from 1st gear and shift into second the car runs perfectly fine until i shift from 2nd to 3rd. As soon as i get into third the rpm drops all the way to 3000 even until full throttle, what is wrong with my baby? can anyone help? thanks all help is appreciated
side note: all gears are fine except for third gear (especially from second to third) but she will do fine if you do a rolling start on third
side note: all gears are fine except for third gear (especially from second to third) but she will do fine if you do a rolling start on third
#3
ninja
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Statesville/Greensboro, NC
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
i am running stock boost as far as i know of..maybe a little creep here and there, what should i look for?
my mods are:
downpipe, catback, pfs smic, alumninum radiator, intake
my mods are:
downpipe, catback, pfs smic, alumninum radiator, intake
#6
RX-7 Bad Ass
iTrader: (55)
Stock computer? That's a lot of mods for the stock ECU. You could be hitting fuel cut.
Dale
Dale
#7
Search Button Advocate
iTrader: (3)
Originally Posted by DaleClark
Stock computer? That's a lot of mods for the stock ECU. You could be hitting fuel cut.
Originally Posted by BoostedFd3s
If I gun the car from 1st gear and shift into second the car runs perfectly fine until i shift from 2nd to 3rd. As soon as i get into third the rpm drops all the way to 3000 even until full throttle
Trending Topics
#9
ninja
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Statesville/Greensboro, NC
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
while under full throttle: from 2nd to 3rd the rpm drops all the way to 3000rpm and then it will slowing pick up....like level7 said, it does feel like i shifted into 5th but i know i didnt. I tried this a couple of times before already and same results...any other suggestions...hope this is clearer...i will also try all the suggestions you guys gave...thanks again
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM