Help indentifying connectors
#1
Junior Member
Thread Starter
Help indentifying connectors
Can anyone help me identify these two connectors? Hoping one is the IAT. They were not connected and my harness has been chopped up a little by the previous owner.
Top is blue/yellow and the bottom is blue/white
Top is blue/yellow and the bottom is blue/white
#3
RX-7 Bad Ass
iTrader: (55)
They look like injector plugs.
Dale
Dale
#4
Junior Member
Thread Starter
Thanks for the help guys. I think I found it.
This looks like it could be the IAT.
Dale, I checked the injectors and those seem to be already hooked up. Thinking those 2 connectors might go to these connections on the UIM. I'm not sure what these are for yet, 'll have to check into that next, looks like something to do with vacuum. I might have to order a new one, one of the nipples broke off.
This looks like it could be the IAT.
Dale, I checked the injectors and those seem to be already hooked up. Thinking those 2 connectors might go to these connections on the UIM. I'm not sure what these are for yet, 'll have to check into that next, looks like something to do with vacuum. I might have to order a new one, one of the nipples broke off.
#5
RX-7 Bad Ass
iTrader: (55)
Wastegate control and turbo precontrol solenoids. They shouldn't be too hard to find used that are unbroken.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
wonder1and
3rd Generation Specific (1993-2002)
14
11-07-03 02:19 PM