3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help identifying an a/c line

Thread Tools
 
Search this Thread
 
Old Aug 24, 2002 | 05:10 PM
  #1  
duckyjp's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 236
Likes: 0
From: MD, USA
Help identifying an a/c line

My mechanic told me that the high pressure line that runs in between the compressor and the condensor is leaking. He said it was about 2 feet long and I believe he said it was on the passenger side of the car. I am assuming this is the same line that has the release valve for the high side of the system because it is about 2 feet long and runs along the passenger side of the car. The problem is that I know this does not run to the condensor, it connects to a longer high pressure line that runs along the front of the car under the air box, intercooler and battery.

Is there a different high pressure line that he could be referring to? Where is the compressor located? I don't want to buy the line, pay to get a vacuum put on the system and have it refilled only to find that I replaced the wrong a/c line and will have to do it again. Thanks!
Reply
Old Aug 24, 2002 | 11:22 PM
  #2  
duboisr's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 2,171
Likes: 1
From: Nashville Tn
The compressor is below the power steering pump ,the condensor is in front of the radiator. Now go back to the mechanic and have him show you for sure the bad hose, then no costly mistake or argument. So easy to get it right the first time
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 02:44 PM.