help on ECU
#1
Full Member
Thread Starter
Join Date: Nov 2003
Location: Bethesda, MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
help on ECU
I've been offered a G-Force Engineering reprogramed Ecu for $450 shipped.
I haven't heard much about the ECU aside from what the seller told me, and I would love if anyone could share some insight on this chip. I'm going to do some research myself but outside input would be most appreciated. Thanks a lot guys!
I would be running this ECU with my 1993 FD base model. I have a ss downpipe, catback, and an m2 cold air intake
I haven't heard much about the ECU aside from what the seller told me, and I would love if anyone could share some insight on this chip. I'm going to do some research myself but outside input would be most appreciated. Thanks a lot guys!
I would be running this ECU with my 1993 FD base model. I have a ss downpipe, catback, and an m2 cold air intake
#3
Full Member
Join Date: Aug 2002
Location: Fenton, MO
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
from what i have heard about that ecu is you can't really tell if it's been tuned or not, unless you open it up and see a chip from it or something. Other than that, i don't know nothing else about it. If you want a PFS PMS ecu, i have one for 350. You can tune it yourself, but it's already set to 10, 12 and 14 psi, which you can change by switching a small switch.
#4
Senior Member
Join Date: Oct 2002
Location: South Florida
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
The G-Force ECU is the same hardware mod as Pettit or M2. As for the maps, I have no idea what its programmed for.
If you want to verify if its really been modified, it is trivial to do. Unscrew the cover, unscrew the top board and peel it back (its connected to the bottom board via a flexible ribbon-type cable) and if there is a daughter board plugged into a socket then its been modified.
jds
If you want to verify if its really been modified, it is trivial to do. Unscrew the cover, unscrew the top board and peel it back (its connected to the bottom board via a flexible ribbon-type cable) and if there is a daughter board plugged into a socket then its been modified.
jds
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM