3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help..Car wont start

Thread Tools
 
Search this Thread
 
Old Aug 16, 2009 | 06:52 PM
  #1  
iproductions's Avatar
Thread Starter
Just By Chance
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2009
Posts: 21
Likes: 0
From: Toronto, Ontario
Help..Car wont start

Hey there,

I need some help...so last night while driving the car after a hard pull, I couldn't get it into gear anymore. After a few seconds I caught 3rd gear, and slowley went into a parking lot. From there, again, I couldn't catch any gears...let the car sit, then shut is off...now it wont start back up??? WTF happened???

It's not a power issue, as all the lights still turn on, it just wont start...wont even turn over?

Any suggestions?

Thanks
Reply
Old Aug 16, 2009 | 07:02 PM
  #2  
kru510's Avatar
Full Member
iTrader: (1)
 
Joined: Jan 2009
Posts: 173
Likes: 0
From: oakland ca
maybe your starter
Reply
Old Aug 16, 2009 | 07:23 PM
  #3  
Speeder165's Avatar
T/Y Jesus! Re-employed!
Tenured Member: 15 Years
iTrader: (7)
 
Joined: May 2009
Posts: 372
Likes: 4
From: TN
How does the clutch pedal pressure feel with the engine off when you try to change a gear in the transmission? Does it still feel like it always did or different?
Reply
Old Aug 16, 2009 | 08:27 PM
  #4  
iproductions's Avatar
Thread Starter
Just By Chance
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2009
Posts: 21
Likes: 0
From: Toronto, Ontario
At first the clutch pedel was stuck to the ground, but after a few minutes, it started to feel like normal
Reply
Old Aug 17, 2009 | 01:27 AM
  #5  
sake7
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 47
Likes: 0
From: Danbury, CT
this happend to me once.. i had a leak in my clutch line. replace that and refill your clutch fluid and you should be able to get back in gear again
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 03:58 AM.