Hi i got 1600cc injectors from five o motor sport fuel injectors, and fuel rail from rx-7 store. The injectors fit in the rail but the rail won't bolt down, there about 3/4" space between the rail bracket and the engine. Has any one run into this problem. and if so how do you make it work. Is there a kit that will bolt on with out any problem. I would even consider that . Thanks Tony

 

Does this happen to be with a T-78 Install?
Did you remove the diffuser from the injector?

 

i have this on my car, and as the_glass_man said, did you remove the diffusers from the injector seats. You should have no fitment problems.

 

You do have to remove the diffusers or the rail wont fit correctly.

Jason

 

Yes, but it dosn't look like the o-rings seal tight enough .

 

It should seal fine.

 

I friend of mine just did this install. The Diffusers need to come out (plastic) and the injectors will seat. Dont worry.