heater problem
11-23-03, 09:20 PM
#1
Ozone Depleter
Thread Starter
Join Date: Jul 2002
Location: StL
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
heater problem
hey every1,
So it was about 35 degrees in STL today, and it was cold as ***** getting into my car that was sitting outside. However, i noticed that the heater only works in certain positions. It fully works in the defrost, a little cooler in the floor/defrost, same in the floor, lukewarm in floor/dash, and totally ICE cold in the dash position.
Anyone know what would cause that cuz im stumped.
-Zach
So it was about 35 degrees in STL today, and it was cold as ***** getting into my car that was sitting outside. However, i noticed that the heater only works in certain positions. It fully works in the defrost, a little cooler in the floor/defrost, same in the floor, lukewarm in floor/dash, and totally ICE cold in the dash position.
Anyone know what would cause that cuz im stumped.-Zach
11-24-03, 06:55 AM
#2
Lives on the Forum
Don't ask me why but your heater works exactly as Mazda intended it too; you can't get heat from the dash vents.
When it's cold I use the defrost/floor setting as that at least puts heat out the top and bottom of the dash.
When it's cold I use the defrost/floor setting as that at least puts heat out the top and bottom of the dash.
11-24-03, 03:04 PM
#7
Ozone Depleter
Thread Starter
Join Date: Jul 2002
Location: StL
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
okay new question....my hot/cold dial only has three settings, all the way cold, all the way hot, or middle, a little to the hot side. It got broken the day my passenger turned it too far and ever since then it only clicks in those certain regions. Can i just replace that one part or do i have to swap the entire climate control ordeal?
-Zach
-Zach
Trending Topics
11-24-03, 03:21 PM
#8
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by teamstealth
okay new question....my hot/cold dial only has three settings, all the way cold, all the way hot, or middle, a little to the hot side. It got broken the day my passenger turned it too far and ever since then it only clicks in those certain regions. Can i just replace that one part or do i have to swap the entire climate control ordeal?
-Zach
okay new question....my hot/cold dial only has three settings, all the way cold, all the way hot, or middle, a little to the hot side. It got broken the day my passenger turned it too far and ever since then it only clicks in those certain regions. Can i just replace that one part or do i have to swap the entire climate control ordeal?
-Zach
11-24-03, 03:45 PM
#9
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Ok... Can't find the damn pic... And the camera battery is dead... But it LOOKS like you can remove the individual controls and replace them. The cable for each one unplugs, and I'm pretty sure the switch can be removed...
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM