Headlights same in both FC & FD?
#2
Eats, Sleeps, Dreams Rotary
iTrader: (19)
no.
The housings are shaped differently and unless you've swapped your stock housings for a set of H4s, the bulbs and lamp are one piece, so you can't interchange them.
You could probably fit a set of FD lamps (housings) into an FC, but it wouldn't look pretty.
The housings are shaped differently and unless you've swapped your stock housings for a set of H4s, the bulbs and lamp are one piece, so you can't interchange them.
You could probably fit a set of FD lamps (housings) into an FC, but it wouldn't look pretty.
#3
I'm not concerned about the bulbs & lamps, I purchased a set & kit from HIDextra. The part I'm wondering about is if the housing I'm looking at will fit in a FD. The ebay listing says the projector lenses will fit both the FC & FD.
Here's the link if that helps at all...
http://cgi.ebay.com/ebaymotors/86-97...d=p3911.c0.m14
Here's the link if that helps at all...
http://cgi.ebay.com/ebaymotors/86-97...d=p3911.c0.m14
#7
Eats, Sleeps, Dreams Rotary
iTrader: (19)
I got my housings off of eBay, and they're "JDM" so the light pattern's all fucked up because they drive on the left side of the road in Japan.
EDIT: holy crap, I've never seen these. I want.
http://cgi.ebay.com/ebaymotors/93-up...Q5fAccessories
EDIT: holy crap, I've never seen these. I want.
http://cgi.ebay.com/ebaymotors/93-up...Q5fAccessories
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM