Headlight issue with imported ‘92 FD
#1
Newbie
Thread Starter
Join Date: Mar 2018
Location: Houston, TX
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Headlight issue with imported ‘92 FD
Recently imported a 1992 FD without the flip headlights. High beams work but not the low beams. Swapped bulbs and no deal. Any other solutions?
Last edited by xmajd92; 03-21-18 at 04:35 PM.
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,893
Likes: 0
Received 114 Likes
on
66 Posts
Down load the various FD manuals available from the internet. Foxed.ca - Mazda RX-7 Manuals
Buy a good electrical multi-meter.
Start testing the wiring.
Buy a good electrical multi-meter.
Start testing the wiring.
#3
RX-7 Bad Ass
iTrader: (55)
It's a really basic circuit for the headlights. Stock there are 3 wires - low beam 12v, high beam 12v, ground.
You'll have to get a meter and see what's going on. Could be a bad connection, from the picture they cut off the stock plug and wired in their own harness.
Dale
You'll have to get a meter and see what's going on. Could be a bad connection, from the picture they cut off the stock plug and wired in their own harness.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
antiSUV
3rd Generation Specific (1993-2002)
18
08-29-04 12:18 AM
FC3SGTR89
Rotary Car Performance
5
06-11-04 05:04 AM