3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

having brake light issues.

Thread Tools
 
Search this Thread
 
Old 07-22-04, 03:44 PM
  #1  
Rotary Enthusiast

Thread Starter
 
speeddemon7's Avatar
 
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes on 0 Posts
having brake light issues.

Ok so the other day my friend told me that my rear passangers side stop lamps went out.I went to autozone and purchased replacement bulbs and changed them out.Heres the crazy part.The turn signal bulb works without a problem.The same goes for the middle stop lam.Now the one closest to the center light isnt working correctly.With the lights on it works fine.But when the brake pedal is depressed it shuts off completely instead of illuminating both coils like it should.
What is this attributed to? and what would be the best solution for this?
Old 07-22-04, 04:05 PM
  #2  
Rotary Enthusiast

Thread Starter
 
speeddemon7's Avatar
 
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes on 0 Posts
any electrical geniuses in here? I could use some help on this one.My car looks completely retarted with only one bulb lighting up.thanx guys.
Old 07-22-04, 04:13 PM
  #3  
RX-7 Bad Ass

iTrader: (55)
 
DaleClark's Avatar
 
Join Date: Jan 2002
Location: Pensacola, FL
Posts: 15,399
Received 2,438 Likes on 1,509 Posts
Are you sure you got the right bulb? I think the brake lights are 2-way bulbs - they can light up dim for parking/running lights, and bright when you hit the brakes. If you get the 1-way bulb, nothing will light up usually.

Try swapping in the bulb from the other side to double-check.

Dale
Old 07-22-04, 04:32 PM
  #4  
Rotary Enthusiast

Thread Starter
 
speeddemon7's Avatar
 
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes on 0 Posts
its a two way bulb as you specified.I already tried switching bulbs and it still acts retarted.I cant understand what could have happened to it.
Old 07-22-04, 06:33 PM
  #5  
Rotary Enthusiast

Thread Starter
 
speeddemon7's Avatar
 
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes on 0 Posts
anyone else have any clue as to whats wrong with my baby?
Old 07-22-04, 06:39 PM
  #6  
"Challenged" since 1993

 
Rotarded's Avatar
 
Join Date: Sep 2002
Location: Columbus, Oh
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
You have a ground problem in the socket. If you look closesly at the top/side of the socket, you will see a wire connection in a little slot/depression. This is a ground and it is probably rusty and/or corroded and not making a good connection. I took a soldering iron and melted away a little more of the plastic, then took a small peice of emery board and scuffed the area. I then applied a liberal amount of solder to keep the connection solid.

Oh, I have some extra bulbs as well. Did the same thing as you did, only twice about a year apart. I knew all of tht glue sniffing was gonna affect my memory! LOL

Last edited by Rotarded; 07-22-04 at 06:42 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
fastsaab
New Member RX-7 Technical
5
08-19-15 11:42 AM



Quick Reply: having brake light issues.



All times are GMT -5. The time now is 02:56 PM.