Im getting this priblem i dont know what it could be, i have changed out the spark plugs and wires, could it be my injectors being clogged, has anyone had this problem

 

Start by listing your mods and what exactly is happening.
~Tom

 

I have to be careful to let my motor warm up and lean out before I turn it off, or it will start really hard... Seems that if I just move it in the drive and turn it off, after the car sits for a while, the compression is gone.. My theroy is that the extra gas is washing away the oil from the combustion area, and the starting process is so fuel intesive, it takes a long time to get a decent amount ot lube to the rotor and apex seals.. This does not seem to happen if I let the car idle for a few minutes before I shut it off....

Dan

 

i forgot to add that the car turn over but wont start and its not hot out side i tried to jump it but nothing

 

well i have a turbo timer set to about 100 min even when driving mild so i dont think that could be it

 

Does it spin fast like there's no compression? or chuggingly? How'd those spark plugs look? Doused in gas?
~Tom

 

well i get the yang yang yang then it sounds like it wants to then nothing, this happend to me about 4 months ago i put a charger on it and it started rite up do you think that i have a clogged injectors? im just wondering what it could be mazda said that my compression was like 7.2 and 7.1 what ever that means llol but if you could help it would really help

 

has anybody else had this problem

 

That floods the crap out of FD's. Body shop did it to mine twice.

 

Well, if it wouldn't start, then you put a charger on it and it started right up... That should lean you away from the injectors....

How many miles are on the motor? Low compression often leads to hard starts... But sounds like your's is good.

I'd look at:

Plugs
Wires
Battery

Getting your injectors cleaned can NEVER be a bad idea though! AND CHANGE YOUR FUEL FILTER!