Harness ID
04-08-10, 11:06 PM
#1
Just this guy...
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Toronto, Ontario,Canada
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Harness ID
I've got a Harness that doesn't seem to match up to my N3A7 ecu, or to either of my JDM engines (obviously not the 97)
The ID tag is missing, or cut off for some unknown reason. I was told by the seller that this was a RHD 13B-REW harness, but it doesn't seem to match up.
This harness has 3 Yellow plugs at the ecu (should only have 2) no blue plug and a larger male than female white plug.
minor misc plugs on the engine dont match up either, power steering for one, and has 9 vacuum solenoid plugs which is weird, I don't have a US or old style JDM vacuum mess, just the 96+ black box which it most certainly doesn't fit.
Anyway here's photos.
thanks
The ID tag is missing, or cut off for some unknown reason. I was told by the seller that this was a RHD 13B-REW harness, but it doesn't seem to match up.
This harness has 3 Yellow plugs at the ecu (should only have 2) no blue plug and a larger male than female white plug.
minor misc plugs on the engine dont match up either, power steering for one, and has 9 vacuum solenoid plugs which is weird, I don't have a US or old style JDM vacuum mess, just the 96+ black box which it most certainly doesn't fit.
Anyway here's photos.
thanks
04-09-10, 08:28 AM
#3
RX-7 Bad Ass
iTrader: (55)
That was my guess. Could be useful to someone doing a 13B-RE swap, or it can always be used as a parts harness for the connectors.
Dale
Dale
