Guys with the M2 stage 3 kit... need help with the profec b settings
#1
Dont make me Laugh
Thread Starter
iTrader: (8)
Join Date: Feb 2002
Location: All Hope is Lost
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
Guys with the M2 stage 3 kit... need help with the profec b settings
I have the stage 3 m2 kit with mods in my signature, so I was wondering what setting you have for you high and low and your sharp settings. Im not really sure if mine is correctly adjusted.
thanks
thanks
#2
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Well, if I remember correctly, the M2 ECU can support 14psi (Correct me if I am wrong). So I would have the high boost tuned to no more than 14, and the low to 10-12 for daily driving.
If you have a boost gauge just use that to tune the controller. If you DON'T have a gauge, I'd stay off the pedal till you know what the hell you are boosting.
In my GSR, I could NOT ust the high setting on the Profec. I just boosted 11 psi on the low setting. I remember talking to a tech at Greddy and he said NOT to use the high setting... It's for LARGE numbers only. My above statement could very well be wrong, and the high setting may be uncapable of low settings (such as 14 psi). Might want to call M2 and/or Greddy if you can't gt the answer here...
If you have a boost gauge just use that to tune the controller. If you DON'T have a gauge, I'd stay off the pedal till you know what the hell you are boosting.
In my GSR, I could NOT ust the high setting on the Profec. I just boosted 11 psi on the low setting. I remember talking to a tech at Greddy and he said NOT to use the high setting... It's for LARGE numbers only. My above statement could very well be wrong, and the high setting may be uncapable of low settings (such as 14 psi). Might want to call M2 and/or Greddy if you can't gt the answer here...
Thread
Thread Starter
Forum
Replies
Last Post