I have my first dyno session next Monday at Dent Sport Garage in Norwood, MA. Just wanted to see who can come closest to guessing my horsepower.
My current mods according to previous owner:
3mm apex seals with "monster" streetport
Tranny Cryo Treated Gears with new bearings
Apexi RX6 Turbo
Apexi EWG
Custom LSE FMIC 3" piping
Racing Beat TBE
Cooling Mist Meth injection
AEM EMS
HKS EVC-S
Greddy Boost, EGT, and Oil Pressure Gauges
TiAl 50mm bov
HKS DLI ignition amp
Bosch 044 in tank Fuel Pump
Greddy Elbow
PWR radiator
Greddy P/h/m Linked gauges boost/oil pressure/water temp
AEM wideband
Blitz FATT turbo timer
rx7 store secondary rail with 1680cc injectors
1000 Primary injectors w/rails
Fuel pressure regulator
South Bend clutch, proven to hold 600+ lb/ft of tq)
Greddy Pulley kit
BR Racing Coilovers
Polished strut bar
K+N intake

I'm hoping for at least 400hp but I'd be happy with 380 or so.

 

So do we win something? Is this a contest? lol

 

How much boost do you plan on running? I see that you've got meth injection. If the motor is healthy and the turbo is up to snuff there's no reason you shouldn't crack 400 on that turbo setup. Depending on which RX6 spec it is, you can't expect to get much more than that out of it though.

 

Yes the winner gets all the bragging rights.

 

Not sure what the spec on the turbo is but I did see a P27 on the backside of the turbo when I was fixing the wastegate. Boost wise I'll be running about 20PSI.

 

It'll be XXX RWHP, with the 'X' being # between 0-9

 

374

 

good one.

 

Enough to **** on just about everybody on the street?

 

I wish....hahahaha

 

Rx6 turbo I will say 400 if u have a good motor and a good tuner.

 

with a good tune i'll say 403 just to be different from mobeoner :P

 

Guessing your power output is useless without knowing how much boost you are running, and whether you are tuning up with AI....

I could say 380whp at 15psi, or I could say 450whp at 23psi.

Btw, the highest rated South Bend clutch is 415ft/lbs. Not sure who was making 600whp with that one.... Either way, you should be fine at your power level, even on the high side.

http://www.dxdracingclutches.com/html/rx-7.html

 

I see you at 392rwhp, however I then see you turning up the boost a little because you can't stand to be under 400rwhp.

 

As the car sits now, it peaked at 20psi. I would say most likely tuned without AI, AI will just be a safety precaution.

 

Have we met before??? You seem to know me so well.

 

I like your answer....

 

I like your answer just a teeny bit more.

 

probably in the 380-400rwhp range

 

depends on which dyno you are at

 

This is taken straight from their website:

In 2006, we noticed an increase in customers asking about ECU Tuning. We then decided to invest in the tools and knowledge necessary to provide top-notch tuning services. In 2007 the Dyno Dynamics® AWD Dynamometer arrived, a fully load-bearing dynomometer. This dyno is known for its ability to simulate realistic car-to-road dynamics, providing accurate numbers. (It is also known as “The Heartbreaker” since it’s horsepower numbers are a bit lower than the more simple inertial dynos).

 

I think i know this car well and im gonna say youre getting 420whp to 450whp. goodluck on dyno and hopefully u get the numbers you want. i wonder what's chris (carbonfaddict) next project lol..

 

Thanks i would love to get 420-450rwhp. Matter of fact i wish it still had the gt42r then i'd still have 535rwhp. Lol. Last i spoke to Chris he said something about a boosted ls. Whatever it is I'm sure it will be pretty badass.

 

400 hp for a second, then zero hp after you blow it up.

 

Rx6 turbos are tiny and not meant for big hp....they spool like a **** though!