3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Grounding point passenger side cabin?

Thread Tools
 
Search this Thread
 
Old Apr 30, 2012 | 04:40 PM
  #1  
unreal-icarus's Avatar
Thread Starter
Black Dynamite
Tenured Member: 15 Years
Liked
iTrader: (1)
 
Joined: Mar 2008
Posts: 606
Likes: 3
From: Germany
Grounding point passenger side cabin?

Hi,

i searched and didnt find an answer. Whats a good ground point on the passenger side of the cabin? i saw some screws under the glove box that are attached to metal, but i'm not sure if this metal piece touches the body. I need one which is easy to reach without stripping the whole interior .

thanks in advance
Reply
Old Apr 30, 2012 | 04:42 PM
  #2  
Gringo Grande's Avatar
1.5 Goodfella's Tall
Tenured Member 10 Years
iTrader: (97)
 
Joined: Oct 2006
Posts: 4,216
Likes: 2
From: Tampa, FL
Underneath the Passenger Kickpanel where your ECU is located is a factory ground point IIRC.
Reply
Old Apr 30, 2012 | 05:06 PM
  #3  
JM1FD's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (1)
 
Joined: May 2002
Posts: 705
Likes: 0
From: Houston, TX
Originally Posted by Gringo Grande
Underneath the Passenger Kickpanel where your ECU is located is a factory ground point IIRC.
He most definitely recalls correctly. Would not be advisable to tap in at this point with more than a couple of amps of load, however. Go directly to the chassis if you need to ground moderate to high amperage.
Reply
Old Apr 30, 2012 | 05:15 PM
  #4  
Gringo Grande's Avatar
1.5 Goodfella's Tall
Tenured Member 10 Years
iTrader: (97)
 
Joined: Oct 2006
Posts: 4,216
Likes: 2
From: Tampa, FL
He most definitely recalls correctly. Would not be advisable to tap in at this point with more than a couple of amps of load, however. Go directly to the chassis if you need to ground moderate to high amperage.
+1 to what he said also...haha. I just have my PLX gauges grounded there along with my PFC.

There are a ton of studs on the car you can ground to or drill and tap a new one.
Reply
Old May 1, 2012 | 06:35 AM
  #5  
unreal-icarus's Avatar
Thread Starter
Black Dynamite
Tenured Member: 15 Years
Liked
iTrader: (1)
 
Joined: Mar 2008
Posts: 606
Likes: 3
From: Germany
thanks, it worked.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Monsterbox
Single Turbo RX-7's
22
Jul 29, 2022 10:48 PM
bURGRotary87
3rd Generation Specific (1993-2002)
2
Aug 19, 2015 03:54 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM




All times are GMT -5. The time now is 04:58 PM.