RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Grounding point passenger side cabin? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/grounding-point-passenger-side-cabin-996820/)

unreal-icarus 04-30-12 04:40 PM

Grounding point passenger side cabin?
 
Hi,

i searched and didnt find an answer. Whats a good ground point on the passenger side of the cabin? i saw some screws under the glove box that are attached to metal, but i'm not sure if this metal piece touches the body. I need one which is easy to reach without stripping the whole interior :).

thanks in advance

Gringo Grande 04-30-12 04:42 PM

Underneath the Passenger Kickpanel where your ECU is located is a factory ground point IIRC.

JM1FD 04-30-12 05:06 PM


Originally Posted by Gringo Grande (Post 11073954)
Underneath the Passenger Kickpanel where your ECU is located is a factory ground point IIRC.

He most definitely recalls correctly. Would not be advisable to tap in at this point with more than a couple of amps of load, however. Go directly to the chassis if you need to ground moderate to high amperage.

Gringo Grande 04-30-12 05:15 PM


He most definitely recalls correctly. Would not be advisable to tap in at this point with more than a couple of amps of load, however. Go directly to the chassis if you need to ground moderate to high amperage.
+1 to what he said also...haha. I just have my PLX gauges grounded there along with my PFC.

There are a ton of studs on the car you can ground to or drill and tap a new one.

unreal-icarus 05-01-12 06:35 AM

thanks, it worked.


All times are GMT -5. The time now is 10:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands