I am going to be doing the grounding to the car, but I am going to make the stuff my self. Anyone have a write up? I saw damians pictures and stuff, but I need to know exactly where to put the wires, what size for each one, and how long they need to be.

 

Damains write up is about exact as your going to get. He has zoomed in pictures and everything. Theres no need to be "exact'" especially since everyone has different mods that can affect wire length and such. Just go about on your on, and try to do it "correctly" and as clean as possible. Throw some grease on them aftwards or paint that section to keep rust out.

 

Yeah, but the problem is I don't know where the wires go!

 

I just followed all the stock grounds and made a better one in parallel. So there's one behind the UIM on the passenger side, one down low by the block coolant drain plug. Then I added one from the neg. terminal to the frame, and one from the neg terminal of the alternator to that same point of the frame. I also put one from the top/rear bolt of the downpipe to the frame (for grounding the O2 sensor).

I also had hoped for more detail, but once you look around you'll see what you're doing and you can't do it wrong (unless you connect to the wrong side of the battery, LOL).