Greddy turbo timer removal???
03-16-10, 02:32 PM
#1
Still Waiting
Thread Starter
iTrader: (10)
Join Date: May 2009
Location: Powhatan VA
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Greddy turbo timer removal???
I have a greddy turbo timer, silver one. It was in car when bought it and has never worked. It powers but does not keep car running. I just want to remove the unit.
I unplugged the timer but am unsure if there is a harness that needs to be removed?
The unit has a black connector and a brown wire that went to ebrake. The blk connector when into blk connector which leads to a white male and female one with 3 un used wires. Then that set comes upto stock wireing I believe…big white one to left of colomn.
I removed just the unit not wireing besides what is connected to it and car started. I haven’t had a chance to see if alarm works or drive it yet.
Anyone have pics of a greddy turbo timer harness or stock wireing?
Thanks ahead of time.
I unplugged the timer but am unsure if there is a harness that needs to be removed?
The unit has a black connector and a brown wire that went to ebrake. The blk connector when into blk connector which leads to a white male and female one with 3 un used wires. Then that set comes upto stock wireing I believe…big white one to left of colomn.
I removed just the unit not wireing besides what is connected to it and car started. I haven’t had a chance to see if alarm works or drive it yet.
Anyone have pics of a greddy turbo timer harness or stock wireing?
Thanks ahead of time.
03-16-10, 07:12 PM
#2
RX-7 Bad Ass
iTrader: (55)
Turbo timers have a harness that plugs in between the ignition switch and the stock harness going to it. Remove the panel under the steering wheel and the steering column surround and you'll find it.
Dale
Dale
