FD3S2005

iTrader: (11)

ok iv been trying to find any rx7 with this exhaust to hear it at normal speeds and WOT.. iv been planning on getting this but i am not 100% sure.. i would like to know how it sounds before i make a decison... so anyone with it make a audio/video, that would be great..

grimple1

iTrader: (1)

I know this is way off topic but after Sevenstock this year, I was extremely impressed with the quality of corksport's exhaust. I went to their website and found a great audio clips from their exhausts. The FC guys say that the corksports exhausts for their cars are loud. The FD exhaust doesn't sound loud to me at all. At idle you can still hear the birds in the background.

Have a listen:
www.corksport.com
http://www.youtube.com/watch?v=87-TVIdp7tM ---- @ Idle

http://www.youtube.com/watch?v=hRHVpBH1RjQ ---@ rev

http://www.youtube.com/watch?v=WFUkq...elated&search= --- @WOT


And for 289, it sounds like a deal. I'll probably get one just to support the "local" man.

FD3S2005

iTrader: (11)

yes way off topic..

purerx7

iTrader: (61)

their was a recent thread with a few greddy ti clips, do a quick search and you should find it. Ive heard it in person, its pretty loud, especially with a straight mid-pipe, sounds good though.

Jarrett H

Where can you get one for the cheapest price?

Noxlupus

I have a GReddy Ti Catback, DP, and MP.

Here's at idle: http://www.youtube.com/watch?v=fNu2hLdzyJE
Here's normal driving with very light boost (light cause having turbo problems): http://www.youtube.com/watch?v=x8Ly2nZJlAM

aaron1017

25-90 roll

idle + rev

DP -> High Flow Cat -> Greddy Ti

RLaoFD

iTrader: (6)

now i know why they put smog pumps haha. sounds nice at idle, though!

Noxlupus

ROFL, if your refering to my video it's smokey like that because I was haivng turbo issues. It used to not smoke (smog) "that" bad!

FD3S2005

iTrader: (11)

Noxlupus and aaron thank you.. nox your car seemed louder of course because of the mp... thats 1 of the clips i wanted because i wanted an audio of inside to see how loud it was and now if possible could u get a clip of your car at WOT from the outside??

FD3S2005

iTrader: (11)

i want something that i can cruise with the windows down at normal speeds and listen to music but when i go WOT i want it to scream.not like an Apexi N1.. i just found out that the owner before (going through all his recites he saved) has put an aftermarket cat which is a silencer with an HKS Dragger tip.. thats why my car didnt get any louder even when i added the res mp (it should of gotten at least lil louded but it didnt)..

Noxlupus

Yea, I'll take another video of it tonight at WOT for you. In all honesty, I cruse all the time with the windows down and listening to the radio. I don't have a problem. The video that you saw, was with the windows down as well, and as you can see we were able to have a conversation without a problem. WOT, now that's a different beast all together.

FD3S2005

iTrader: (11)

I Cant Wait Iv Been Dying To Hear It.. also where did you get it and for how much? dont they go for around 600+

Noxlupus

I've uploaded two more movies for you.

The first one I'm getting onto the interstate and do two WOT pulls with the windows down. The 2nd one is doing a 80mph to 140mph pull with the windows up. With this two video you should hear pretty much everything you want to hear.

What you'll find is that the winds at higher speeds actually drowns out the sound of the exhaust, however it sounds pretty good with the windows up. I can tell you this though, it's VERY loud from when it was being tuned on the dyno. I'll see if I can find that video as well.

Here are the links:
Ride Shutgun
Ride Shutgun part 2

FD3S2005

iTrader: (11)

does sound great.. question tho.. if you could go back and change exhausts would you pic the same thing again or another type?? just curious to see how much you like it...

Noxlupus

If I could go back and change the exhaust, I would get a used 1st run production version... in other words one without the curled lip. Nothing but cosmetics. Other then that I wouldn't change it at all... well maybe try to find someone who's willing to part the street version and sell me their mid pipe. As I understand it, it's also made of Ti.

As far as where I got it, I got it from Mary from Rotary Performance for $600 + shipping. They are one of our forum vendors.