anyone have the link to a site that walks you through the installation for the Greddy front mount for the 3rd gen.

Thanks for any help

 

I would like to see it too!!! Im doing the install next week!!

 

Its too much fun especially if it is the new style that mount way up front,you have to cut away alot of your bumper cover and the fiberglass reinforcement to make it fit and of course the directions were in japanese.

 

Give me a call if you need a hand, I'll be free most of the week and wouldn't mind getting my hands dirty.

 

its not too hard, just follow the Jap. directions as much as you can, follow the PICTURES. Some of the pics are kinda hard to see, but to let you know, you will have to do some cutting of the body, its the little nubs that stick out on the front, and a panel of the passengerside insde the engine bay, its under the wires that run along the underside of the hood latch... if you have any snags PM me soon and i can give you my phone number. GOOD LUCK!
Huy

 

the thing that you have to be careful with is cutting the front bumper I saved away a little at a time so it was flush up against it if you cut too much there is no going back, it is a little bit of a pain because you have to take the bumper off and on alot to check each time you shave a little off but it is worth it in the end. Good luck

 

Anyone have any pics?

 

Mine just arrived and does not even have Japenese directions. Does anyone have them so they can e-mail them to me. thanks for any help
BCaffey630@aol.com

 

Come on guys help me out

 

I have the some pics of the front bumper removal but cant post them because they are so big......Im STILL waiting for my IC...

 

I have the shop manual, so bumper removal is not the problem. I was wondering about the placement of the IC and the radiator.