xshawn801x

iTrader: (7)

so im getting ready to install my fmic, and the kit i bought was used and did not come with the power steering cooling loop. am i able to just use the stock one? if not where can i purchase the one for this kit?

MR_Rick

iTrader: (7)

You can buy some tubing and a tube bender from your local autoparts and make the "cooler" yourself.

KKMpunkrock2011

iTrader: (5)

wish I had seen this earlier, I wouldn't have thrown mine in the trash when I pulled my power steering. Just do what hondasr4kids said, its the next best solution.

edit: I wish you had posted this sooner, I threw the stuff away two weeks ago.

akunochi

iTrader: (7)

If you decide to bend your own pipe let me know and I'll get you measurements.

xshawn801x

iTrader: (7)

I have a tubing bender how long and what size tubing do I need? And how do I put the ends on?

Brodie121

iTrader: (8)

It's on the low pressure side of the pump so all you do is slide the hose over and clamp it with a hose clamp if I remember right.

xshawn801x

iTrader: (7)

Ok cool sounds easy enough

MR_Rick

iTrader: (7)

Look at the stock one and go from there. The tubing comes on a spool. You will have enough to do it.