Im looking to replace my stock throttle body elbow, and get the Greddy 2 pc pipe kit from rx7 store. heres a link:
http://www.rx7store.net/product_p/greddy2pcskit.htm

Its says "This kit also contains another section of piping designed to mate the elbow to the stock intercooler and most aftermarket units.

Just curious if it will mate perfectly with a Pettit Coolcharge II (oldstyle) IC?
I searched but couldn't find anything on it. Thanks!

-Mark

 

If you read it it also states it does not come with the "S" pipe...that could run you into problems trying to find that one pipe. I have this 2 piece pipe kit for sale in the 3rd gen section, no comp tube.

 

I dont need the "S" pipe, as the Coolcharge II mates up with the crossover pipe already. just need the throttle body side.

 

It will depend on the thickness of the IC then. GReddy has two pipe kits available...I have both the GReddy kits...one works with the stock IC and the greddy elbow, and one for the GReddy SMIC and the GReddy elbow.

The stock IC kit has a shorter crossover pipe then the GReddy SMIC kit. I think your cool charge kit would be thicker like my GReddy SMIC...meaning you would need the shorter top pipe kit. See if you can contact Jason at the store to find out what top pipe this kit has. If you want i can measure both my top pipes to give you an idea of the differnce between them

 

are u willing to sell the pipe kit for the greddy SMIC?

 

Heres my set up, dirty, needs a good clean, which it will. but just to show the IC.

 

the only problem the 2 piece kit is it doesnt come with the couplers or anything like that, just the 2 pipes. Thats why the 3 piece is over 200 more, because it comes with the other pipe, but also all the couplers needed.

 

by the looks of that pic neither set will work.....you may need custom pipes or something. Hopefully someone with a coolcharge can chim in on what they used

cheers
shawn