Got the white face gauges installed! BUT...
#1
Senior Member
Thread Starter
Got the white face gauges installed! BUT...
I got them installed and they look NICE.... few things I noticed... for starters.. the previous owner must have used some sort of scratchy type material to clean the gauges cause the plexi glass (plastic) is scuffed up (I thought maybe it was moisture on the inside or somthing). Second the gauges light up a little yellowish... not really green. It doesn't look that bad tho.
Everything was fine... I had time left... so.......... lets install the PFC!!!! w00h00!!!
Cut the wires... after checking... double, triple, quadruple checking... and caped them off (in case I need to reconnect them for some reason. Mounted the PFC and reconnected the battery. Hoped in the drivers seat and prepared to let her idle for 30min. BUT She didn't start... she tryed and then died. Like she didn't even want to carry an idle (almost like it never tryed). So I checked all connections and tryed again.. I noticed that I hear a FAST clicking sound when I turn the key to the ON position. I can smell gas after trying to start also. I don't know what to do!! I'm so upset I posted a thread on the PFC board so if you have ANY idea on what I should do please hop over the the thread and post somthing!
Everything was fine... I had time left... so.......... lets install the PFC!!!! w00h00!!!
Cut the wires... after checking... double, triple, quadruple checking... and caped them off (in case I need to reconnect them for some reason. Mounted the PFC and reconnected the battery. Hoped in the drivers seat and prepared to let her idle for 30min. BUT She didn't start... she tryed and then died. Like she didn't even want to carry an idle (almost like it never tryed). So I checked all connections and tryed again.. I noticed that I hear a FAST clicking sound when I turn the key to the ON position. I can smell gas after trying to start also. I don't know what to do!! I'm so upset I posted a thread on the PFC board so if you have ANY idea on what I should do please hop over the the thread and post somthing!
Thread
Thread Starter
Forum
Replies
Last Post