Been pulling the engine, got everything out except for the last piece of the clutch which attaches to the gearbox/fork and is within the clutchbell. Can somebody tell me how to get it out.

Just found out its a hks twin plate clutch.

Regards,

Rogier

 

Are you talking about the throwout/release bearing?

If so, I believe you have to unbolt the clutch fork, then remove the fork and the release bearing.

Dale

 

If you still have the pressure plate and disc in the tranny, there is a small circular clip that holds things in. It's kind of like an inverted snap ring. That has to come off.

Adam

 

thanks guys, I'll try it tonight.

 

you have to push the ring in to the pressure plate. i made that mistake before and it was bad.