gauge pod question
01-10-02, 04:42 AM
#1
almost done
Thread Starter
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
gauge pod question
just wanted to know who makes a tri pod whole pillar for the FD autometer only has the 2 gauge podthat screws to the stock pillar thanks.
02-12-02, 03:58 PM
#2
Junior Member
Join Date: Dec 2001
Location: -
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
noone makes it, and I have done some serious serching. you can get a dual and a single autometer gauge pod and put them together using glue or double-sided tape to stick to the piller. I suggest not drilling holes in the piller since parts are hard to come by for FDs
02-12-02, 09:45 PM
#3
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
A pillar replacement
I bought a replacement "A" pillar so I could keep the original one undamaged. You can get one from someone who has wrecked there car and parting it out, or someone stripping one out for a race car......third choice is get one from a right hand drive passenger side "A" pillar (usualy perfect) and not too expensive.
02-13-02, 07:59 PM
#5
Junior Member
Join Date: Dec 2001
Location: -
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
if anyone finds a one piece triple pod, let me know. I have also done some searching, and I have seen where someone custom made their own triple, but no manufacturer sells a triple for the FD. I bought a dual and single autometer and put them together, and it looks great. that may have been what you saw.
