GAH Help me quick! (air filter/airbox)
#1
Full Member
Thread Starter
GAH Help me quick! (air filter/airbox)
why does changing my air filter have to be so damn hard!!!
I have two pics
Does anyone know where this hose connects to?
I detached it to open the airbox, but when i was attaching it back on , i realized the end of it was not connected to anything? i looked to see what it could connect to , but i can't see what it would connect to ?
also (pic2) i accidentally broken the plastic while pulling off the hose....is this one of the hoses that can be left open to the atomsphere....if not how can i fix it? glue ? what type...
thanks a lot to whoever can help me out.
I have two pics
Does anyone know where this hose connects to?
I detached it to open the airbox, but when i was attaching it back on , i realized the end of it was not connected to anything? i looked to see what it could connect to , but i can't see what it would connect to ?
also (pic2) i accidentally broken the plastic while pulling off the hose....is this one of the hoses that can be left open to the atomsphere....if not how can i fix it? glue ? what type...
thanks a lot to whoever can help me out.
#4
Passenger
Posts: n/a
Well I hope this helps.
you have 4 smaller hoses:
1-Blow off valve
2-charge releif valve
3-air pump (breather)
4-No where just kind vents or something.
2 Bigger ones
small u bend -Primary turbo
long black pipe-Secondary turbo
Hope this helps
-Rikki
you have 4 smaller hoses:
1-Blow off valve
2-charge releif valve
3-air pump (breather)
4-No where just kind vents or something.
2 Bigger ones
small u bend -Primary turbo
long black pipe-Secondary turbo
Hope this helps
-Rikki
#6
Full Member
Thread Starter
Okay, thats what i thought. can the air pump inlet be opened up the atomsphere? mine broke off (the plastic that the hose connects to) or do i have to have it attached ? thanks
Trending Topics
#9
Ex fd *****
BOTH THOES HOSES are part of the airpump BYPASS air vent - There is a small muffler chamber built into the top of the AIRBOX also - Leaving those hoses off/open won't hurt anything (they VENT only no suction) but will lead to the dreaded MOOING - The plastic nipple can be reattached with JB-Weld.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM