Fuse box issue
09-08-11, 08:09 AM
#1
Passenger
Posts: n/a
Fuse box issue
Ok so I pulled the wiring from the front of the car to get some mods done so I can fit my intercooler and now I am putting everything together and I am getting a short somewhere.
There are 2 fuse boxes on the driver side. One that contains relays and small fuses for the radio and AC, that box is rectangular. The other one is long and not wide at all and carries the main relay and hooks on directly to the battery.
I placed my battery in the truck and ran a wire in wire loom through the firewall. I took off the bracket that the box used to use to mount to the battery and hooked my POS cable to the pos side once the bracket was taken off. On the back side of the box there was a ground attaching the box to a chassis ground. I also ran that ground.
I am missing the cable that goes from the long fuse box with the main relay to the rectangular fuse box.
If anyone can help i would appreciate it.
There are 2 fuse boxes on the driver side. One that contains relays and small fuses for the radio and AC, that box is rectangular. The other one is long and not wide at all and carries the main relay and hooks on directly to the battery.
I placed my battery in the truck and ran a wire in wire loom through the firewall. I took off the bracket that the box used to use to mount to the battery and hooked my POS cable to the pos side once the bracket was taken off. On the back side of the box there was a ground attaching the box to a chassis ground. I also ran that ground.
I am missing the cable that goes from the long fuse box with the main relay to the rectangular fuse box.
If anyone can help i would appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM