3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Full boost with you non-sequential guys

Old Feb 19, 2002 | 01:37 AM
  #1  
kwikrx7's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,392
Likes: 0
From: Mechanicsburg, PA USA
Full boost with you non-sequential guys

When do you guys get full boost by? I've heard anywhere from 3K all the way to 5K with most being around 3.8-4K. With a hi-flo cat or restrictive exhaust you should get full boost a little sooner.
Reply
Old Feb 19, 2002 | 01:42 AM
  #2  
neevosh's Avatar
The Dude Abides
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 601
Likes: 0
From: san jose, ca
I get full boost around 4300 RPM's and a few hundred RPM lower in 5th gear. This is with the stock cat and the easily reversable non-sequential setup.
Reply
Old Feb 19, 2002 | 06:38 AM
  #3  
Silver7's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 652
Likes: 0
From: GA
My boost kicks in at about 4K rpms with a midpipe. Very laggy for stock turbos IMO! I have ridden in other non seq cars with very similar results.
Reply
Old Feb 19, 2002 | 07:31 AM
  #4  
cewrx7r1's Avatar
Eye In The Sky
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 7,941
Likes: 133
From: In A Disfunctional World
I am full boost between 3200 to 3500rpm depending on the gear and weather. DP and MP. Complete conversion with clipped turbine wheels to help control boost creep, and enlarged WG.
Reply
Old Feb 19, 2002 | 09:46 AM
  #5  
Bacon's Avatar
IRS 4 Life
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
dp-mp-nurspec

with ported wg and some porting to the turbo manifold itself..id get 12psi by 3600 in 3rd
oh that was after a good bit of playing with the profec-b
Reply
Old Feb 19, 2002 | 01:11 PM
  #6  
kwikrx7's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,392
Likes: 0
From: Mechanicsburg, PA USA
My primary turbo has a bad seal and isn't working but my secondary (working for both) spools up between 3.9 and 4.1K - what was weird is one day like 2 months ago my car seemed like it was amazingly fast - I took it out for a joy ride - watched as I had full boost by 3K rpms!!!! Weird, huh. I need new turbos!!!!! DP, hi-flo, N1
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sen2two
AEM EMS
9
Oct 23, 2015 07:51 PM
Turblown
Single Turbo RX-7's
0
Aug 14, 2015 04:48 PM
Clacor
Single Turbo RX-7's
0
Aug 14, 2015 09:17 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:53 AM.