3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

fuel pump and start elec problem

Old Aug 5, 2007 | 01:11 AM
  #1  
D3a7hX's Avatar
Thread Starter
Ric-Ric, **** Tom-Tom
Tenured Member 10 Years
iTrader: (1)
 
Joined: Aug 2006
Posts: 89
Likes: 0
From: Nor-Cal
fuel pump and start elec problem

ok so im finishing up a long awaited rebuild. the car has been sitting for just shy of a year. my problems include... fuel pump does not kick on when key is put to run. and starter does not kick with key it turned..
my remote start kicks the starter over but the key does nothing.
so my questions include. where are the ignition circuit and fuel pump plugs, resistors, fuse's and relays located? did i just miss a plug somewhere? or what could be goin on.. im gonna beat on the fuel pump tomarrow a little and try jumping it and checking my contenuety(however the hell you spell it. lol) but im thinking its not just the fuel pump because of the starter not working with the key.
im kinda lost at the moment. very tired and just looking for a little information of where to check and what to do about this.
any info is great. pics are even greater! haha.
thx for your time.

-Ric
o ya. 93 with full emmisions and airpump removal. and full non sequential.
didnt change to fuel pump.
Reply
Old Aug 5, 2007 | 10:06 AM
  #2  
D3a7hX's Avatar
Thread Starter
Ric-Ric, **** Tom-Tom
Tenured Member 10 Years
iTrader: (1)
 
Joined: Aug 2006
Posts: 89
Likes: 0
From: Nor-Cal
bump, anything would be great. thx.
Reply
Old Aug 5, 2007 | 01:15 PM
  #3  
D3a7hX's Avatar
Thread Starter
Ric-Ric, **** Tom-Tom
Tenured Member 10 Years
iTrader: (1)
 
Joined: Aug 2006
Posts: 89
Likes: 0
From: Nor-Cal
bump

bumperoooooooooooooni!
Reply
Old Aug 18, 2009 | 01:26 PM
  #4  
yiaracer's Avatar
Junior Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: May 2007
Posts: 41
Likes: 0
From: wisconsin
having same issue with my car too..just got done putting in motor and now its doing what you said..starter not turning over and can't hear fuel pump. hear a click that comes from the front of the engine somewhere but thats about it..and i also jumped the f/p and gnd and fuel pump works
Reply
Old Aug 21, 2009 | 03:21 AM
  #5  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
Heres how you fix this problem.

1. Open the 3rd gen FAQ
2. Download the FSM
3. Locate the Starting system diagram
4. Check check the connectors

If this doesn't work come back and somebody will probably be more willing to help you.
Reply
Old Aug 21, 2009 | 03:35 AM
  #6  
yiaracer's Avatar
Junior Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: May 2007
Posts: 41
Likes: 0
From: wisconsin
hmm..already did all that..will have to triple check it tomorrow

Originally Posted by RotorDream
Heres how you fix this problem.

1. Open the 3rd gen FAQ
2. Download the FSM
3. Locate the Starting system diagram
4. Check check the connectors

If this doesn't work come back and somebody will probably be more willing to help you.
Reply
Old Aug 21, 2009 | 03:39 AM
  #7  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
where is the start output wire for your remote start ran to? your own statements point to their being a problem between your IGN switch and wherever your remote start wire splices in
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
LunchboxSA22
2nd Generation Specific (1986-1992)
37
Oct 26, 2015 10:53 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:19 PM.