fuel pump and start elec problem
#1
fuel pump and start elec problem
ok so im finishing up a long awaited rebuild. the car has been sitting for just shy of a year. my problems include... fuel pump does not kick on when key is put to run. and starter does not kick with key it turned..
my remote start kicks the starter over but the key does nothing.
so my questions include. where are the ignition circuit and fuel pump plugs, resistors, fuse's and relays located? did i just miss a plug somewhere? or what could be goin on.. im gonna beat on the fuel pump tomarrow a little and try jumping it and checking my contenuety(however the hell you spell it. lol) but im thinking its not just the fuel pump because of the starter not working with the key.
im kinda lost at the moment. very tired and just looking for a little information of where to check and what to do about this.
any info is great. pics are even greater! haha.
thx for your time.
-Ric
o ya. 93 with full emmisions and airpump removal. and full non sequential.
didnt change to fuel pump.
my remote start kicks the starter over but the key does nothing.
so my questions include. where are the ignition circuit and fuel pump plugs, resistors, fuse's and relays located? did i just miss a plug somewhere? or what could be goin on.. im gonna beat on the fuel pump tomarrow a little and try jumping it and checking my contenuety(however the hell you spell it. lol) but im thinking its not just the fuel pump because of the starter not working with the key.
im kinda lost at the moment. very tired and just looking for a little information of where to check and what to do about this.
any info is great. pics are even greater! haha.
thx for your time.
-Ric
o ya. 93 with full emmisions and airpump removal. and full non sequential.
didnt change to fuel pump.
#4
Junior Member
iTrader: (3)
Join Date: May 2007
Location: wisconsin
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
having same issue with my car too..just got done putting in motor and now its doing what you said..starter not turning over and can't hear fuel pump. hear a click that comes from the front of the engine somewhere but thats about it..and i also jumped the f/p and gnd and fuel pump works
#5
Rotary Ninja
Join Date: Oct 2007
Location: Wichita Falls, TX
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Heres how you fix this problem.
1. Open the 3rd gen FAQ
2. Download the FSM
3. Locate the Starting system diagram
4. Check check the connectors
If this doesn't work come back and somebody will probably be more willing to help you.
1. Open the 3rd gen FAQ
2. Download the FSM
3. Locate the Starting system diagram
4. Check check the connectors
If this doesn't work come back and somebody will probably be more willing to help you.
#7
Rotary Ninja
Join Date: Oct 2007
Location: Wichita Falls, TX
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
where is the start output wire for your remote start ran to? your own statements point to their being a problem between your IGN switch and wherever your remote start wire splices in
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM