Fuel pressure regulator, how to know for sure if it is bad?
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Location: Cincinnati
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pressure regulator, how to know for sure if it is bad?
I've read on the site that a sure fire way to tell if the FPR is bad is to pull the vacuum hose going to it, and if there is gas in it then the FPR is bad. Is this true, and if so, where is the vacuum hose? The only hose I see on the FPR is on the top and it is a fuel line according to the factory manual.
Thanks,
-Charlie
Thanks,
-Charlie
#2
development
only way I know to tell, is if it doesn't hold pressure. put a fuel pressure gauge in on of the lines. robs site has a how too...I'm sure if you search you'll find it.
#3
RX-7 Bad Ass
iTrader: (55)
The vacuum line is there. If you're crafty enough, you might be able to pull it off with the intake manifold on. It should be pretty obvious if you're looking at the FPR.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM