3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

fuel pick-up prblm...please help

Thread Tools
 
Search this Thread
 
Old 08-14-04, 04:57 PM
  #1  
Full Member

Thread Starter
 
eurautodave's Avatar
 
Join Date: Nov 2001
Location: cincinnati
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
fuel pick-up prblm...please help

i have checked and rechecked everything i can think of. i have a new pump (that seemed to help the prblm temporarily) and still when i corner to the left at <2/3 of a tank the car starves for fuel. below 1/2 tank it will cut-out if i accelerate too hard in a straight line. filling the tank always makes it run great! i tried the search and hope one of the rotary gurus can help...the fuel pump is a hp stock replacement(nippondenso), had a walbro, didn't last very long. i do use 2 stroke oil, wonder if that may clog the pick-up sock somehow?
Old 08-14-04, 05:04 PM
  #2  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes on 66 Posts
Are you still using that stock bell shape connector between the pump and fuel line.
Internally it has a nylon part and an "O" ring. The nylon part can crack, mine did.
This will affect fuel pressure or flow.

Cut it off and connect the metal pipe to the pump oulet with injector grade fuel line. This requires the pump to now be held on with two clamps.
Old 08-14-04, 05:06 PM
  #3  
Full Member

Thread Starter
 
eurautodave's Avatar
 
Join Date: Nov 2001
Location: cincinnati
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
i don't remember. i was just hoping to get some ideas before i take it apart...again. thanks for a great suggestion.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: fuel pick-up prblm...please help



All times are GMT -5. The time now is 01:12 PM.