Eep

Im not too sure on all I need, but Im going single, want to get rid of the hardpipes that are under/on the rats nest, got the rx7store fuel rail and 1600s, and a SX FPR, could any of you tell me the length of line (I figure -8 would be good enough?) I need to replace from the tank to the injectors, and whatever else is in between, and all the fittings if possible?

Thanks a whole lot in advance
nick

DRAG0NEER

just go to a local parts store and get like 10 feet of fuel lines and cut it yourself...

wonder1and

yup... find the good clamps too... they are completly circular and not like regular band clamps...

Eep

isnt 10 feet a little short for replacing all the fuel lines?

DRAG0NEER

well then get 30 or 40 feet

rxrotary2_7

where do you want to replace them from? the firewall/ stock hardlines? if so, 6 ft of braided line will be plenty and leave room for mistakes if it is you first time messing with AN fittings. for more info email me at rxrotary2_7@yahoo.com and i can walk you through doing it.

Eep

from the fuel tank to the injectors, ripping out hardlines.