fuel level sender specs
11-24-03, 04:48 PM
#1
-
Thread Starter
iTrader: (3)
Join Date: Nov 2002
Location: SF Bay Area
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
fuel level sender specs
im troubleshooting my problems with my gas gauge and i cant find the specs for the fuel level sender in any of the service manuals.
i need to know the full and empty resistance.
ive measured it at about 1500 to 1400 which is about the standard 90 ohm range but usually this is 0-90.
i need to know the full and empty resistance.
ive measured it at about 1500 to 1400 which is about the standard 90 ohm range but usually this is 0-90.
11-24-03, 10:06 PM
#2
-
Thread Starter
iTrader: (3)
Join Date: Nov 2002
Location: SF Bay Area
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
ok then i went and took my meter and a pot and figured it out myself. for future reference its 0 ohms full 90 ohms empty which is standard.
now i think the float is hitting the baffle. does anyone have a pic of what it should look like directly inside the access cover? is the baffle supposed to run that close to the pump?
now i think the float is hitting the baffle. does anyone have a pic of what it should look like directly inside the access cover? is the baffle supposed to run that close to the pump?
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM