3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

front wiper problem, power on motor but no wipers

Thread Tools
 
Search this Thread
 
Old 12-17-08, 11:22 AM
  #1  
Senior Member

Thread Starter
 
zanthrax's Avatar
 
Join Date: Dec 2004
Location: The Netherlands
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
front wiper problem, power on motor but no wipers

While driving today my front wipers stopped working.
I checked to fuse, 20A like it should be, not blown.
Checked all plugs on the stalk under the steering cowl, no problems.
Checked the connector to the motor, the ground (black wire I assume?) is OK, with the stalk in the lowest position (fast wiping) all 4 other pins in the connector carry 12V.
With the stalk in the intermittent position a clicking sound is heared from somewhere in the dash.

Does anyone have any tips other than replacing the motor maybe? Thanks!
Old 12-17-08, 02:37 PM
  #2  
Senior Member

Thread Starter
 
zanthrax's Avatar
 
Join Date: Dec 2004
Location: The Netherlands
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Just took the car for another drive and I didn't realise I had left the wipers on when looking for the problem.
When I hit a speedbump the wipers started working again...

If there is one thing I hate more than electrical problems it's intermittent electical problems.
Old 12-18-08, 02:39 AM
  #3  
T3DoW

iTrader: (10)
 
TpCpLaYa's Avatar
 
Join Date: Nov 2001
Location: Chicago - NW Burbs
Posts: 3,755
Received 5 Likes on 3 Posts
try lightly hitting the motor with a hammer or something while there on to see if it jars them to life. Possible there could be a bad solder on the motor circuit.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
andyvideopro
General Rotary Tech Support
2
08-11-15 09:16 PM



Quick Reply: front wiper problem, power on motor but no wipers



All times are GMT -5. The time now is 05:22 PM.