3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Front body harness routing

Thread Tools
 
Search this Thread
 
Old Jul 12, 2005 | 01:13 PM
  #1  
JordonMusser's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 89
Likes: 0
From: college station
Front body harness routing

I am trying to install a new front body harness (one that runs inside the fenders, and around the front) but I realized since I bought the car already burned, and it is my first FD... I can only guess where it runs (expecially in the headlight/front bumper area.

anybody have any pics that show this well? thanks!
Reply
Old Jul 12, 2005 | 01:27 PM
  #2  
TT_Rex_7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Jun 2004
Posts: 1,457
Likes: 0
From: Gallatin, TN
Are you speaking of the harness that's in the drive side fender? If so...It wraps around the front of the car, goes through the drive side fender, then to the fuse box and other boxes under the kick panel, then runs behind the dash. The same harness also runs along the driver side door sill, and all the way to the back of the car. I havn't had the whole harness out, but from what I could tell, it's all one damn peice. It doesnt seem to seperate itself anywhere along the way.

-Alex
Reply
Old Jul 12, 2005 | 02:21 PM
  #3  
JordonMusser's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 89
Likes: 0
From: college station
yea, thats it. It actually does seperate itself in the dash. I already got it hooked up again, i just dont know where to run it exactly as far as around the heat light areas/front bumper etc....
Reply
Old Jul 12, 2005 | 02:35 PM
  #4  
TT_Rex_7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Jun 2004
Posts: 1,457
Likes: 0
From: Gallatin, TN
Originally Posted by JordonMusser
yea, thats it. It actually does seperate itself in the dash. I already got it hooked up again, i just dont know where to run it exactly as far as around the heat light areas/front bumper etc....
Well, I stand corrected. Well, to give you an idea of where it all runs...It runs under the driver side fender, the around the back of the driver side headlight. From there it hooks to the relay/fuse/diag. boxes located in the motor compartment, on the driver side. The harness also continues to run along the side of the driver side headlight, and behind the front bumper to another relay box. Then from there, it goes to the pass. headlight, around the back, and then to 4 relays in the motor comparment on the pass. side. I *think* that's it. I hope that helps.

In a couple hours i'll post up some pics of everything if that'll help you! Just LMK.

-Alex
Reply
Old Jul 12, 2005 | 02:56 PM
  #5  
JordonMusser's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 89
Likes: 0
From: college station
thanks for the description, but some pictures would be worth 1000 words :-D

thanks man!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
BLK 93
3rd Generation Specific (1993-2002)
4
Aug 19, 2015 03:47 AM




All times are GMT -5. The time now is 07:57 PM.