3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Floor Priming?

Old Mar 31, 2014 | 05:14 PM
  #1  
3rd GEN LS1 RX7's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2011
Posts: 24
Likes: 0
Floor Priming?

Ok so i removed all factory sound deadening to replace with damplifier but there are some areas that i had to wire brush down and some metal is exposed. I would like to give the floor a good coat of some kind of rust preventing paint like VHT epoxy paint. Thing is it only comes in black and car is red. The damplifier is gonna go over the black epoxy paint then the rug is going back in should i worry about the under floor board being black and the car is red? Would it hurt resell value?
Reply
Old Apr 1, 2014 | 07:58 AM
  #2  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,725
From: Pensacola, FL
If some buyer is so **** that they'll pull the carpet up to check the paint color and go "Aha!" and try to bargain you down, you've got an ******* buyer.

In other words, I wouldn't worry about resale value.

You could also just prime it with a zinc primer then paint that with a red top coat.

Dale
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Frisky Arab
2nd Generation Specific (1986-1992)
5
Sep 4, 2015 06:17 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:37 AM.